Cycle Specialties

GL800, F6B Electric Option kit w/ Switch Housing: purchased w/o Windbender Kit $420.95

This product is only available upon request. Contact us for a quote.

Finally, a Nearly Plug-n-Play Electric Adjust Option for the Windbender: Our new electric option can be added to any Windbender with minimal disassembly of your motorcycle. Our motor draws less than one amp of electric current, so you can plug it into your accessory circuit without the use of relays or extra fuses. It carries an IP54 rating; " waterproof to spray from all angles". It has built in limit and over-temperature switches. And it moves one inch per second!

Adjust your Windbender for changing conditions, with the touch of a switch: With a full four inch stroke, you can put your Windbender where you want it, when you want it. Riding twisties? Put it down. Highway riding? Put it up. Raining? Put it even further down to let the wind blow the rain off your face-shield. Passenger? Put it back up. Traffic? Put it down for better visibility. Adjust it anytime you like, at any speed!

Tool-less top shield removal: You can remove the Windbender top shield by simply pulling the clevis pin from the top mount and lifting the shield out of the adjustment rails. We utilize spring-detent balls in our upper mount so there are no cotter pins to lose. No tools are required to change or clean shields.

Available with or without the handlebar switch housing: While we find it very convenient to mount our switch next to our left thumb on the handlebar, not everyone will want it there. Whether you are concerned about confusion with the horn button or relocation of the left hand-grip, or just don't want the switch on the handlebar, get the kit without the housing, save a few bucks, and mount your switch in any location you choose; we provide plenty of cable.

One Year Warranty: Windbender electric motor kits are guaranteed for one full year from date of purchase against manufacturing defects or failures.

Please Note: We recommend setting up your Windbender in manual adjustment mode before installing the electric option. Drilling through the windshield is required. To accurately drill the holes you will need to know what adjustment heights work best for you and your riding style.

If your adjustment rails are set-up properly, the windshield with electric option can chatter slightly in downward motion while your motorcycle is at rest. This is normal and wind pressure while riding will keep it from doing so.

While installation of our new electric option is relatively simple; some general knowledge of working on your motorcycle will be helpful. A factory service manual may be useful but is not required. Read through the instructions to see what is involved.

CB USERS: If you are using a CB radio, you will hear the DC induction motor (static) through your headset. This is normal. The amount of noise you hear or don't hear can be controlled by adjusting the squelch on your CB.

WARNING: Although your Windbender motor is waterproof to rain and gentle washing, DO NOT POWERWASH THE MOTOR!

Made in the USA

Cycle Specialties is also a Repair Facility, and Store. Please come visit or call.

HOURS: Tuesday-Saturday 9:00am-5:00pm

ADDRESS: 5701-D NE 105th Ave.
Portland, OR

TOLL FREE: 1-855-445-4412
PHONE: 503-445-4412
FAX: 503-445-4412

EMAIL us at: info@cycle-specialties.com

Payment Option

Join Our Email List

We promise to only send you good things like sales alerts and other goodies!